Company Name Contact Info Location
ADANA KAĞIT MAKİNALARI - AYŞENUR YÜKSEL
Efer 5 Sanayi Sitesi 46205 Sok. A Blok No:10 / Seyhan / ADANA / TÜRKİYE
Contact Info: +90 533 764 3439
Hall: 8
Stand: 814B
Product Groups
  • Paper-Cardboard Packaging, Corrugated Cardboard
  • Packaging Rings
  • Protective Packaging, Insulation Materials, Cushioning, Filling Supplies and Humidity Absorbers
  • Pallets
  • Separators, Anti Slip Materials for Stacks

No company info found.

AUTOMATIC PAPER PIPE MOUTH CURLING MACHINEMOUTH CURLING MACHINE
PRODUCT DESCRIPTION:

Moulds with 54 or 69 mm are fitted to the machine. Cutted ready tubes are arranged in a row on a pallet of AKM-200 and pushed start button. Machine make he process of curling the mouth of pipes automatically with curling mould. It is discharged to the packet the other side of pallet. 25 units in a minute curling is made

AUTOMATİC PAPER SLITTER REWINDER MACHINEREWINDER MACHINE
PRODUCT DESCRIPTION:

Paper bobin is attached to loading stand.it is gone up and electronic break is adjusted.paper goes to cutting knives after is adjusted to any size.then it is pasted to cartridge over pneumatic winding rolls and is given the speed to the machine. when the diameter of rewind is 950 mm the machines is stopped. Rewind journal bearing will open and air shaft will be pulled tos ide and closed air of pneumatic shaft sliced paper bobin is taken from shaft.

ELECTRONIC MULTI BLADE MIHFER TUBE MACHINEMIHFER TUBE MACHINE
PRODUCT DESCRIPTION:

AKM-300 Paper reel stand unit : Sliced papers are loaded to reel stand in consecutive and give angle to transfer rolls and sent to glueing paralel AKM-301 Paper glueing unit: Sliced papers pass from stretching rods succesively. Glue is drained on the paper by pneumatic glue pump.Sliced papers coming from sliced paper rods g o to winding unit. When you want,you can give 85 degree temperature to oil system tank. AKM-302 Spiral winding unit : Mould to any diameter is attached to machine.Wnding belt is adjusted to width of paper and tension will be done.All sliced papers pass guidance shaft is sent under mould and belt.Spiral pipe start to produce endless.In this system winding cycle have double action and speed can be adjusted by electronic device. Six knive are adjusted to any length.cutting speed is sychoronized as machine speed.The cutting length of tube is adjusted and cutting process is finished quietly and smoothly.Cutting product is sent to stacking section.

AUTOMATIC PAPER PIPE SLICING MACHINE (20 KINIVES)PIPE SLICING MACHINE
PRODUCT DESCRIPTION:

Attach the shaft for counted diameter. Machine will be ready to start after a few adjustments. Worker give the paper tube to system and let the cover close to the shaft by pneumatic system. Knife system starts to cut by pneumatic system. After the cutting process finished cutting system gets back into its position. Closed cover open and tube exiting system starts to remove cutted tubes from the machine.

SINGLE BLADE CUTTING MACHINE
PRODUCT DESCRIPTION:

The desired mould is attached to the machine. Knife is adjusted as size of length of tube and push start button. Worker plugs the pipe to the mould and does the cutting process with food system. Cutted tube is taken from the mould and attached a tube again. This process continues and so, gets the tube to any length.

ELECTRONIC PAPER MIHFER TUBE MACHINE (SET)
PRODUCT DESCRIPTION:

AKM-300 Paper reel stand unit : Sliced papers are loaded to reel stand in consecutive and give angle to transfer rolls and sent to glueing paralel AKM-301 Paper glueing unit: Sliced papers pass from stretching rods succesively.Glue is drained on the paper by pneumatic glue pump.Sliced papers coming from sliced paper rods g o to winding unit.When you want,you can give 85 degree temperature to oil system tank. AKM-302 Spiral winding unit: Mould to any diameter is attached to machine.Wnding belt is adjusted to width of paper and tension will be done.All sliced papers pass guidance shaft is sent under mould and belt.Spiral pipe start to produce endless.In this system winding cycle have double action and speed can be adjusted by electronic device. AKM-303 Small glueing machine : Single sliced paper bobin is attached to machine .It which passed glue rolls is winding on the pipe as adjusted angle. AKM-2098 SIZE PIPE CUTTING MACHINE ELECTRONIC MİHFER: Mihfer controlled by the cutting to length of the pipe. so quiet and smooth cutting process is finished. Isitif section of pipe made #8203;#8203;of cut and transferred to mihfer.This machine, pipe cutting to length mihfer max.5000mm min.700mm SECTION STACKING: Electronic cut section cut from the cut mihfer mihfer pipes pipe stacking sequence konveyerüne stand transferred to the falls

25 PLIES PAPER TUBE MACHINE (AUTOMATIC SYSTEM)
PRODUCT DESCRIPTION:

AKM-300 Paper reel stand unit : Sliced papers are loaded to reel stand in consecutive and give angle to transfer rolls and sent to glueing paralel AKM-301 Paper glueing unit: Sliced papers pass from stretching rods succesively.Glue is drained on the paper by pneumatic glue pump.Sliced papers coming from sliced paper rods g o to winding unit.When you want,you can give 85 degree temperature to oil system tank. AKM-302 Spiral winding unit: Mould to any diameter is attached to machine.Wnding belt is adjusted to width of paper and tension will be done.All sliced papers pass guidance shaft is sent under mould and belt.Spiral pipe start to produce endless.In this system winding cycle have double action and speed can be adjusted by electronic device. AKM-303 Small glueing machine : Single sliced paper bobin is attached to machine .It which passed glue rolls is winding on the pipe as adjusted angle. AKM-2098 Automatic paper tube length cutting machine: Spiral tubes comes to here in a controlled way.limit group is adjusted to any length.when the tube touched to the object, photocell start warning and cutting knives move.pneumatic cutting process is finished smoothlyand quiet.When it saw second photocell,cutting pipe is pushed to stacking section with pneumatic piston.This system which have five machine produces to any quality,diameter and length speedly.

PAPER EDGE PROTECTOR MACHINE
PRODUCT DESCRIPTION:

Sliced papers reel stand unit on the give one by one.the papers while pass to bobin give to more tension. Then the sliced paper go to glueing unit.Then adjust to glueing mandrel and tension mandrel. All sliced papers on the give glue with pneumatic pump.All sliced paper go to top craft unit.Than all sliced paper go to pres unit. The tension give to pneumatic spool. Then edge board go to electronic cutting unit.Then you must be adjusted cut a edge board length and write to operator channel so than adjust a cut angle unit operation. Exit to cutting product came to stacking unit belt.at the end of cutting product.came to stacking table

AUTOMATIC PAPER EDGEBOARD EDGE CUTING MACHINE
PRODUCT DESCRIPTION:

The produt is edgeboard two top knifes between into the help to special knife whit make a cut operation. cutted product down to stocking table. the produce length is 30 mt./min.

NONWOVEN SARMA VE KESME MAKİNASI
PRODUCT DESCRIPTION:

The paper bobin that it will be sliced is loaded to Bobin loading stand. The contact between grounds is remove by electro mechanic lifting system. Over opening belt system brings on the paper by using pneumatic system.The speed of Bobin progress is adjusted.After the end of bobin paper passed from cutting knives,it is adjusted to any size and rewind on tube cartridge in middle of double rewind rolls.Side pneumatic cartridge tightener presses the cartridge and the machine is given speed.after all adjustmentsof side pneumatic and tension, the speed of machine is adjusted.When it is arrived the desired diameter, machine stopped.Product is sent to front stack and the middle aluminum tube is taken and so, the production is finished.

No represented companies found.